Peter <PICLIST@MITVMA.MIT.EDU> wrote:

> Does MPLAB 3.4 work on NT4? and how (any special setting I should know
> about)?

and Peter Schultz <PICLIST@MITVMA.MIT.EDU> replied:

> It will not work on NT4.

    Well, that's the answer I would have given, too... But only
    because I hear "MPLAB Emulator" when anyone says "MPLAB".

    If Peter is using only the MPLAB simulator or editor, it will
    work fine under NT4; it's only the emulator (and other hardware
    devices) that don't work.

    When MPLAB was first developed, it was just a text-editor and
    assembler integrated with the PIC-Master emulator.  Later, the
    simulator and PIC-Start Plus were added to the environment, then
    the ProMate and the ICEPIC emulator were added, and now there's
    support for SIMICE, at least three C compilers, and Microchip's
    linker and librarian, as well. Soon, MPLAB will control the
    MPLAB-ICE emulator, too.

    With all these options, it may no longer be sufficient to ask
    questions about just "MPLAB"; instead, we should all get into
    the habit of specifying exactly which components of MPLAB we're
    asking about.

    -Andy


=== Andrew Warren - fastfwd@ix.netcom.com
=== Fast Forward Engineering - Vista, California
=== http://www.geocities.com/SiliconValley/2499