On Wednesday, July 01, 1998 17:45, John
Bellini[SMTP:JBellini@STATPOWER.COM] wrote:
> I think you can use it directly in the 16C84.  You only have to watch
> for the bank bits to be set correctly (STATUS,RP0).
> You usually run in problems with bank bits not set correctly and the
> wrong registers end up being written too.
>
> John Bellini
>
>
> -----Original Message-----
> From: Amr Ahmed A. [mailto:amr77@HOTMAIL.COM]
> Sent: Wednesday, July 01, 1998 9:42 AM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: How convert 16c54 code to 16c84 code?
>
>
> Hello
>
> I have downloaded a SSAVI decoder that uses PIC16C54
> i have 16C84 pic. and i want to convert PIC16C54 code to PIC16C84
> How that?
>
>
>
>
>
> Thanks,
> AMR
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
Watch the speed. 16C84 only goes to 10MHz and if I remember well the
decoder I saw worked at 20MHz (you may have another decoder and this
does not apply).

Best Regards,
Paulo Soares