Thank you Al

It was just the hint I needed. No more assembler-errors.

LHZ

.....................

Al Lovrich wrote:

> Hope this helps.
>
> "This user just needs to set the node properties -- in that dialog is the
> "case sensitivity" switch.  They need to select "Project > Edit Project",
> select their target node (if they aren't using a linker) or their .asm node
> (if they are) and then click the "Node Properties" button.  On the dialog
> that appears, they should disable case sensitivity."
>
> -----Original Message-----
> From: pic microcontroller discussion list
> [mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Lars Hoffensetz
> Sent: Monday, June 29, 1998 5:41 PM
> To: PICLIST@MITVMA.MIT.EDU
> Subject: Problem vith MPLAB 3.40
>
> I have downloaded the latest version of MPLAB from Microchip. (ver.
> 3.40.09) but now I get a lot of error messages like:
>
> .....
> Building xxxxxxxx.HEX...
>
> Compiling xxxxxxxx.asm:
> Command line: "C:\MPLAB\MPASMWIN.EXE /p16C63 /aINHX8M /e+ /l+ /q
> C:\MPLAB\PROJ\xxxxxxxx.asm"
> Error[113]   C:\MPLAB\PROJ\xxxxxxxx.ASM 75 : Symbol not previously
> defined (portb)
> .....
>
> from the MPASM-assembler when I use the "Make Project" command.
>
> I know that this happens because the include-file (p16c63.inc in my
> exemple) use capital letters in all names and I do not.
> In the old version (3.31) I could add the " /c-" option to the
> command-line options i the "modify compiler" menu-entry.
>
> How can I do the same in version 3.40.09??
>
> LHZ
>
> --
> Regards,
> Al Lovrich
> Microchip Technology Inc          Tel: +1 602 786-7602
> 2355 W Chandler Blvd              Fax: +1 602 917-4311
> Chandler, AZ  85224                    +1 602 917-4149