Hope this helps.

"This user just needs to set the node properties -- in that dialog is the
"case sensitivity" switch.  They need to select "Project > Edit Project",
select their target node (if they aren't using a linker) or their .asm node
(if they are) and then click the "Node Properties" button.  On the dialog
that appears, they should disable case sensitivity."

-----Original Message-----
From: pic microcontroller discussion list
[mailto:PICLIST@MITVMA.MIT.EDU] On Behalf Of Lars Hoffensetz
Sent: Monday, June 29, 1998 5:41 PM
To: PICLIST@MITVMA.MIT.EDU
Subject: Problem vith MPLAB 3.40


I have downloaded the latest version of MPLAB from Microchip. (ver.
3.40.09) but now I get a lot of error messages like:

.....
Building xxxxxxxx.HEX...

Compiling xxxxxxxx.asm:
Command line: "C:\MPLAB\MPASMWIN.EXE /p16C63 /aINHX8M /e+ /l+ /q
C:\MPLAB\PROJ\xxxxxxxx.asm"
Error[113]   C:\MPLAB\PROJ\xxxxxxxx.ASM 75 : Symbol not previously
defined (portb)
.....

from the MPASM-assembler when I use the "Make Project" command.

I know that this happens because the include-file (p16c63.inc in my
exemple) use capital letters in all names and I do not.
In the old version (3.31) I could add the " /c-" option to the
command-line options i the "modify compiler" menu-entry.

How can I do the same in version 3.40.09??

LHZ

--
Regards,
Al Lovrich
Microchip Technology Inc          Tel: +1 602 786-7602
2355 W Chandler Blvd              Fax: +1 602 917-4311
Chandler, AZ  85224                    +1 602 917-4149