Caisson wrote:
>
> > Van: WF AUTOMACAO <wf@AMBIENTE.COM.BR>
> > Aan: PICLIST@MITVMA.MIT.EDU
> > Onderwerp: PIC17C756 PROGRAMMING FUSES
> > Datum: donderdag 25 juni 1998 2:28
> >
> > Hi,
> >
> >         The programming Fuses Options must be selected on PICSTART PLUS
> > or must be embedded on .HEX file to program?
>
> You can do both.  If you specify your OPTION register in your source-file,
> PICSTART PLUS copies them into it's programmer-settings (Change the
> __CONFIG in your source, re-assemple and see it happen ...) .  If you don't
> have them specified in your source-file, the current (last specified)
> programmer-settings will be used.
>
> >         If is on program, does someone have a sample?
>
> Yes, I do.  This (below) is what I use as settings for a 16x84 :
>
>   __CONFIG  H'3FF9'  ;-CP, +PWRTE, -WDTE, XT
>
> You can also set the configuration this way :
>
>   __CONFIG  _XT_OSC & _PWRTE_ON & _WDT_OFF & _CP_OFF
>
> ;_CP_OFF         ...1....  \ Code protection
> ;_CP_ON           ...0....  /
> ;_PWRTE_OFF  ....0...  \ Power-up timer
> ;_PWRTE_ON    ....1...  /
> ;_WDT_OFF       .....0..  \ WatchDog timer
> ;_WDT_ON         .....1..  /
> ;_LP_OSC          .....00  \
> ;_XT_OSC          ......01   \ Oscillator
> ;_HS_OSC         ......10   /
> ;_RC_OSC         ......11  /
>
> The actual equates (_CP_OFF equ 0x10 etc.)  are set in the include-file
> (Pxxxxxxx.INC) and are different for every PIC.
>
> Greetz,
>   Rudy Wieser

Thank you Greetz! Now i understood!

Miguel.