You might get some info from http://www.pc-card.com
This is the official site for PCMCIA and Cardbus info.

Best regards,
John

-----Original Message-----
From: Mark A. Corio <Mcorio@AOL.COM>
To: PICLIST@MITVMA.MIT.EDU <PICLIST@MITVMA.MIT.EDU>
Date: Monday, June 15, 1998 7:29 AM
Subject: Flash Card interface.


>Hi all,
>I am working on a project where I have a PIC doing some data collection and
>the data is to be stored in a "standard" Flash Memory Card (2MB). The card
is
>to then be plugged into a PC for data extraction. Are there different
>protocols for the data so that the PC will know what to do with it? Does
the
>PC think it is a disk? Any pointers into how I can read the data out of the
>Card, and therefore what format to use in writing the data to the card in
the
>first place?  I assume the card can be accessed by the PIC by just applying
>appropriate address and data to the card's pins. Is there a www site with
the
>pinout standard, etc.?? Thanks.
>
>Mark A. Corio
>Rochester MicroSystems, Inc.
>200 Buell Road, Suite 9
>Rochester, NY  14624
>Tel: 716-328-5850
>Fax: 716-328-1144
>http://www.frontiernet.net/~rmi/
>****** Designing Electronics for Research and Industry ******
>