re: Lattice ispGAL22V10

   To followup on Leon's comments, I've added a schematic for a buffered
parallel port cable and programming board that allows you to program Lattice
Semiconductor's ispLSI1016, ispLSI2032, and ispGAL22V10 devices. This is for
folks that don't have Lattice's ISP Starter Kit. You can download the
archive from my web page at:

      http://www.teleport.com/~thandley/Wilbure.htm

   To program their ispGAL22V10 all you need is the buffered cable which
basically contains a 74HC367 and some passive components, and the ISP Daisy
Chain Download software which is also on Lattice's web site.

   For more information about Lattice Semiconductor's products and to
download the ISP Daisy Chain Download software and/or ISP Synario design
software, contact:

      http://www.latticesemi.com

   - Tom

At 05:44 PM 6/10/98 +0100, Leon Heller wrote:
[snip]
>The Lattice 22V10 is very easy to program via a simple parallel port
>interface. You can get a free CD-ROM with development software, data,
>etc. from Lattice distributors. It's really intended for their larger
>CPLDs, but the 22V10 is included.
>
>Leon
>--
>Leon Heller: leon@lfheller.demon.co.uk http://www.lfheller.demon.co.uk
>Amateur Radio Callsign G1HSM    Tel: +44 (0) 118 947 1424
>See http://www.lfheller.demon.co.uk/dds.htm for details of my AD9850
>DDS system. See " "/diy_dsp.htm for a simple DIY DSP ADSP-2104 system.
>
>