Hiya all

I am in the final stages of refining our second generation GSM
modem, and now have to face the engineer's bane :
                    *aesthetics* ! <shudder>

The electronics is done and works well, and the enclosure has
been designed and the plastic injection moulds are being made.
The front of the box will be curved, and a sticker with windows
wil cover this front part.

We have narrowed down the design for this sticker to three
likeley candidates, and would appreciated it if you could have
a look at them and cast your ballot.

                        I NEED YOUR OPINION

So, please, please have a look at :
http://www.wasp.co.za/~tjaart/gcomvote.html

After voting, you can see the effect of your ballot by reloading the page.

BTW it has a 12C508 in it (really).

--
Friendly Regards

Tjaart van der Walt
mailto:tjaart@wasp.co.za

|--------------------------------------------------|
|                WASP International                |
|R&D Engineer : GSM peripheral services development|
|--------------------------------------------------|
|SMS mailto: 0832123443@wasp.co.za  (160 chars max)|
|     http://www.wasp.co.za/~tjaart/index.html     |
|Voice: +27-(0)11-622-8686  Fax: +27-(0)11-622-8973|
|          WGS-84 : 26¡10.52'S 28¡06.19'E          |
|--------------------------------------------------|