Javier Gonzalez Marcos <jgmarcos@comadrid.es> wrote:

> I'm using the MPASM 3.40 IDE.
> ....
> After run the simulation, the code captured in the Trace Memory
> Window shows all the labels and the special CPU register as text (
> W, STATUS, PCL...), but all the RAM variables are shown as the hex
> address instead of the defined name
> ....
> is [this] a 'natural limitation' of MPSIM?

Javier:

Yes, it's a natural limitation in MPLAB 3.40.  Microchip will
improve the behavior of the "Trace" window in future versions.

-Andy

=== Andrew Warren - fastfwd@ix.netcom.com
=== Fast Forward Engineering - Vista, California
=== http://www.geocities.com/SiliconValley/2499 (personal)
=== http://www.netcom.com/~fastfwd (business)