At 08:21 AM 15/05/98 -0700, you wrote:
>Got a question concerning I2C data transfer from a master
>to a slave I2C part.
>
>If I need to send 4 consecutive bytes to a slave, which chip does the
>acknowledgement between each byte sent?  Do I allow for an ack after
>the last byte before sending a STOP command?
>
>In my setup, there is only 1 master and 1 slave.  I do not need
>to read any data bytes from the slave.
>
>Thanks.
>Dave
>dschmidt@silcom.com
>
>
Try to check Vincents Himpes FAQ page which may be downloaded
from FTP//fpt.uni.paderborn.de/elrad/020/

best regards,
Hans
--
Temperature Technology
263 Gilbert Street
ADELAIDE  SA  5000

web page:       http://dove.net.au/~ttec
email:          ttec@dove.net.au

--