Daniel Poirot wrote:

> > I am working on a greenhouse temperature controller where a 16F84 is
> > to communicate with a National temperature sensor LM75 over the i2c
> > protocol.  After reading all the data sheets on the LM75, I find it
> > difficult to begin.
> >
> > Is there an easy way out? If I am only reading the temperature values
> > and not using all the features that i2c can do.  There is nothing much
> > I can find in national and Philips web sites that is useful.
>
> I sure would like to see a little tutorial on I2C.  Anybody out there
> want to show us what they learned on?

I have a few good links to I2C resources and tutorials on my page
:http://www.wasp.co.za/~tjaart/electronicsearch.htmlLook right at the bottom.
--
Friendly Regards

Tjaart van der Walt
mailto:tjaart@wasp.co.za

|--------------------------------------------------|
|                WASP International                |
|R&D Engineer : GSM peripheral services development|
|--------------------------------------------------|
|SMS mailto: 0832123443@wasp.co.za  (160 chars max)|
|     http://www.wasp.co.za/~tjaart/index.html     |
|Voice: +27-(0)11-622-8686  Fax: +27-(0)11-622-8973|
|          WGS-84 : 26¡10.52'S 28¡06.19'E          |
|--------------------------------------------------|