The major problem that I notice is when I run any version of Microsoft Word, I cannot build a project or the system hangs. John Bellini > -----Original Message----- > From: Craig Lee [SMTP:craiglee@telusplanet.net] > Sent: Tuesday, May 05, 1998 12:34 AM > To: PICLIST@MITVMA.MIT.EDU > Subject: Re: MPLAB 3.40 crashes > > My symptom is occasionally when I have something highlighted and then > I > move the mouse pointer, I get an error message, this is typically in > the > build > results window. Usually I can safely hit ignore several times, but > sometimes > it down right crashes. > > > Craig > > -----Original Message----- > From: Calvin > To: PICLIST@MITVMA.MIT.EDU > Date: Monday, May 04, 1998 11:58 AM > Subject: Re: MPLAB 3.40 crashes at breakpoint! Sometimes... > > > > > >>MPLAB 3.40 is a little unstable for me. Recently I've been working > on > >>software for the 17c43, the 17c756 and the 12c671 and the crashes > I've had > >>are usually independent of whether I'm emulating (with a PICMaster) > or > >>simulating. > > > > > > > >> > >>A couple of funnies that I've had with pretty much all versions of > MPLAB > >>I've used is that sometimes the menu bar is two lines tall instead > of one > >>(so that when I load a project, my windows don't fit the area) and > >>sometimes one of the pulldown menus will be the width of the screen > whilst > >>the other menus are normal. For either of these two occurrances, I > just > >>close and reopen MPLAB for it to go away. > >> > > > > > >Hey, > >I thoght I was the only one getting these!!!. > > > >Calvin > > > > > > > >>3.40 is the only version of MPLAB that I've had any trouble with, > but I'm > >>sticking with it (for the moment, at least) because of the extra > watch > >>window facilities and because of the '671 work I'm doing. Two or > three > >>crashes per day is irritating, but I can _JUST_ live with it (any > MPLAB > >>developers reading this post - you didn't see that!). > >> > >> > >> > >>- Andy. > >> > >>---------------------------------------------------------- > >>Andrew David, Software Manager, Ultronics Ltd, Cheltenham. > >>akdavid@Ultronics.co.uk > >>---------------------------------------------------------- > >> > >