My symptom is occasionally when I have something highlighted and then I move the mouse pointer, I get an error message, this is typically in the build results window. Usually I can safely hit ignore several times, but sometimes it down right crashes. Craig -----Original Message----- From: Calvin To: PICLIST@MITVMA.MIT.EDU Date: Monday, May 04, 1998 11:58 AM Subject: Re: MPLAB 3.40 crashes at breakpoint! Sometimes... > >>MPLAB 3.40 is a little unstable for me. Recently I've been working on >>software for the 17c43, the 17c756 and the 12c671 and the crashes I've had >>are usually independent of whether I'm emulating (with a PICMaster) or >>simulating. > > > >> >>A couple of funnies that I've had with pretty much all versions of MPLAB >>I've used is that sometimes the menu bar is two lines tall instead of one >>(so that when I load a project, my windows don't fit the area) and >>sometimes one of the pulldown menus will be the width of the screen whilst >>the other menus are normal. For either of these two occurrances, I just >>close and reopen MPLAB for it to go away. >> > > >Hey, >I thoght I was the only one getting these!!!. > >Calvin > > > >>3.40 is the only version of MPLAB that I've had any trouble with, but I'm >>sticking with it (for the moment, at least) because of the extra watch >>window facilities and because of the '671 work I'm doing. Two or three >>crashes per day is irritating, but I can _JUST_ live with it (any MPLAB >>developers reading this post - you didn't see that!). >> >> >> >>- Andy. >> >>---------------------------------------------------------- >>Andrew David, Software Manager, Ultronics Ltd, Cheltenham. >>akdavid@Ultronics.co.uk >>---------------------------------------------------------- >> >