I also would be interested in these.
A solution I used was to bend the rear row of pins so that they laid on top of t
he
stripboard and then soldered wires to these. Fiddley and untidy but it does work
.

Keith
http://www.btinternet.com/~krazy.keith
Krazy Keith's World of DIY Home Automation

----------
From:   john pearson[SMTP:xero@CWIA.COM]
Subject:        RJ45 jacks with .1" spaced pins?

Does any one know of any RJ45 jacks that have pins spaced so that they can
be inserted into a breadboard? All the ones I have seen have pins spaced .1"
per row, but there are always two rows and they are offset so that the jack
cannot be inserted into a breadboard.
Thank you.
John