I am developing a program in a windowed PIC14000.  It is factory
preprogrammed with calibration data for oscillator, wdt, bandgap etc.

Problem: First time I erase it I will loose the calibration data in the chip.

I trying MPLAB 3.40.
For now, I read the target, then use Window\Calibration Data... , and then
copy-paste each value to a special file within project, keeping all chips
all calibrating data.

And when programming, the same way reverse.  Easy to make errors.

There should be, and probably is, a way to save calibration data to a file
for each of my developement chips, so I can import them when programming.

I use 6 numbered chips, cycling them between programmer, prototype and eraser.
Don«t tell me about emulator; there is nor space, power or money enough  ;)

Regards
/Morgan

/  Morgan Olsson, MORGANS REGLERTEKNIK, SE-277 35 KIVIK, Sweden \
\  mrt@iname.com, ph: +46 (0)414 70741; fax +46 (0)414 70331    /