Hello,

Many thanks to everyone that answered my previous query.

My program seems to be going along quite nicely so far but now I've hit a brick
 wall called DATA EEPROM MEMORY. I just cant seem to write to it!

This is what i have currently in the program and im still running it in the
 simulation. The eeprom Window doesnt update with the new value. Is there
 something im doing wrong here?

--------------------------------------------------
  BCF   STATUS, RP0   ;Bank 0
  ;set eeprom address
  movf address, W
  movwf EEADR

  ;write data to EEDATA
  movf data1, W
  movwf EEDATA

  BSF   STATUS, RP0   ;Bank 1
  BCF   INTCON, GIE   ;Disable INT's
  movlw 0x55
  movwf EECON2        ;Write 55h
  movlw 0xAA
  movwf EECON2        ;Write AAh
  bsf   EECON1, WR    ;Set WR bit begin write
  bsf   INTCON, GIE
--------------------------------------------------

Thanks again,

Gabes.




____________________________________________________________________
Get free e-mail and a permanent address at http://www.netaddress.com/?N=1