> From: Bob Blick <bob@TED.NET>

> I'm using a 16C74A with two analog inputs. ADCON1 is set 04h, so I
> actually have three analog inputs. Is it OK to use the extra analog pin
as
> an output, as long as I set TRISA accordingly? I recall this is the case,
> and looking at the block diagram of the innards of the chip it looks like
> that's OK to do.

Yes, its work.
But don't try to use this pin as digital input!
You are always read "0", and not use BCF/BSF instruction - use a mirror
register.

==============
Alex Torres, Kharkov, Ukraine (exUSSR)
altor@geocities.com
2:461/28 FidoNet
http://www.geocities.com/SiliconValley/Lab/6311