Ok...the code is

     movlw     0x20
     movwf    fsr
     movlw    0xAB
     movwf    indf

Rafael Pinto


-----Original Message-----
From: Andre Abelian <andre@compufire.com>
To: PICLIST@MITVMA.MIT.EDU <PICLIST@MITVMA.MIT.EDU>
Date: Segunda-feira, 6 de Abril de 1998 18:25
Subject: Re: fsr


>Hi HardyThank you for your explanations  and example.
>I think line 2 instead of movf should be movwf.
>unless           movf    fsr,w
>
>
>Andre
>
>
>>     1. You use to do Indirect register access. An example:
>>
>>     movlw     0x20
>>     movf    fsr,f
>>     movlw    0xAB
>>     movf    indf,w
>>
>>     This program loads 0xAB into the register 0x20. This can be used when
>> you want to store a table using RAM file registers. FSR points to the
>> register and INDF is the contents of the register.
>>
>>     2. The value wrote in the INDF is stored in the register indicated by
>> the value of FSR.
>