Hi John,

I think we're talking about two different beasts.

As I mentioned, the YAP will burn in _CONFIG/_IDLOCS information from the
object file (in fact, that's the only way of doing it).

myke

>At 03:00 PM 3/17/98 -0500, you wrote:
>>Hi John,
>>
>>What type of parameters do you want to load?  In the YAP, if you set up the
>>_CONFIG and _IDLOCS, they will be programmed into the PIC with the rest of
>>the code.
>>
>Myke,
>
>Thanks for responding.
>
>I hope I am not confusing your YAP with the YAPP, which I viewed at
>Picpoints web page. I am not familiar with your programmer if they are not
>the same.
>
>My ideal programmer would work off the pc serial port so that I could have
>about a 15' cable. I could also program a variety of devices, perhaps by
>sending a text file to the programmer to set up pulse timming, ect.. and I
>could send data and parameters with my serial port communications software
>so that I could create my own programming environment and not have to depend
>on the programmers proprietary software.
>
>I have set up a nice little programming environmet using a serial com.
>program and text editors, the assembler and batch files to bring them all
>together for programming 68hc11s. I was hoping I could create the same type
>of environment for pics.
>
>Anyway, I am looking. I hope this is what I can do with your programmer.
>Please let me know.
>
>Thanks
>John
>
>

"If people don't know what you're doing, they don't know what you're doing
wrong." - Sir Humphrey Appleby K.C.B