Attached is a good serial driver from Hi-Tech C.  It's not interrupt
driven.
I have tested it at 19.2 K baud, using a 8Mhz XTAL.

Craig
----------
> From: James & Ili <jandi@MPSI.NET>
> To: PICLIST@MITVMA.MIT.EDU
> Subject: RS232 Receiver code ?
> Date: Tuesday, March 10, 1998 1:13 PM
>
>
> Hello,
>         I am looking for some code that will enable me to receive RS232
at
> about 9600 or so baud. I have the Application notes with RS232 from
> Microchip but was looking for something a little more compact.
> Doesn't matter if it's interrupt driven or not. ( I have no
> experience with interrupts.. maybe time to learn!)
>         Thanks in advance.
> James Holbrook
Content-Type: application/octet-stream; name="Serial.c"
Content-Transfer-Encoding: 7bit
Content-Description: Serial.c (C Source File)
Content-Disposition: attachment; filename="Serial.c"

Attachment converted: wonderland:Serial.c (????/----) (00014656)