I used IVEX before but switched to CIRCAD (also shareware).
It has no pin limitation and can print with center hole or without.

Reggie

----------
> From: PHXSYS <PHXSYS@AOL.COM>
> To: PICLIST@MITVMA.MIT.EDU
> Subject: PCB Question
> Date: Friday, February 27, 1998 6:24 AM
>
> I want to use the tone transfer system to make a prototype PCB. I have
the
> shareware IVEX board layout program. I have never made a PCB before. I
can
> print only the pads and tracks, but there is no center hole in the solder
pad,
> it is solid. Do I just drill the center of the solder pad to insert the
pin?
> Or is there another way to print the pad with the center pin hole?
>
> Jon