On Thu, 12 Feb 1998 10:17:46 EST, you wrote:

>Does Anyone know of a cheap 4 channel 8 bit A/D converter. I have been
>practicing with a LTC1298 (12 bit 2 channel). I don't need the resolution or
>the high$ and I will need 4 channels. I want to be able to use the same code I
>developed for the LTC1298 (taking resolution into consideration). Any
>suggestions or cheaper solution. I may end up with the 16C71 and a serial
>EEprom, but I want to get all the code working using a 16F84
>
>Jon
I doubt you'll find anything cheaper than a 16C710/711. You could
always use one with a small convert/send routine as a slave a/d
converter while you develop the code on the 16F84. 
     ____                                                           ____
   _/ L_/  Mike Harrison / White Wing Logic / wwl@netcomuk.co.uk  _/ L_/
 _/ W_/  Hardware & Software design / PCB Design / Consultancy  _/ W_/
/_W_/  Industrial / Computer Peripherals / Hazardous Area      /_W_/