At 04:17 PM 1/28/98 +0000, you wrote:
>I have myself had a very dissappointing experience last night using one of
the
>"Toner Transfers"  even though the toner is of good quality.  I will be
trying
>this method described in "Electronics Now" for comparison very shortly.

You have to use the right amount of heat.

Too little, and the pattern doesn't stick.
Too much, and you can melt the plastic and 'blur' the toner.

I use a regular iron, set close to the highest setting, and 'guess'
for the amount of pressure and time to use.