At 09:49 20.01.1998 +0100, you wrote:

Hi,

>Then there is one thing I do not understand. If you take a look in the
>datasheets for the 16C62A it says that the SSP can be configured as I2C
>firmware controlled Master mode (SSPCON Register). Does firmware mean that
>you have to implement it in software?? Do anybody have the code or some

unfortunately yes.

>documentation for a I2C Master?? There is no documentation for the code at
>Microchip's webpage, so it's not easy to figure out the way they do it!!

Look for AN554 "Softwareimplementation of I2C Bus Master". I've got it from
the "Embedded Control Handbook" but I it's available in WWW also. Have a
look at: http://www.microchip.com/10/Appnote/PIC16CXX.htm. There is a pdf
00554c.pdf and the sources in 00554.zip.

Regards

Thomas
=8-)

**********************************************************
* Thomas Magin                  FON:   ++49-761-4543-489 *
* marquette-Hellige GmbH        FAX:                -507 *
* Emergency Systems             email: magin@hellige.de  *
* Munzinger Str. 3                                       *
* D-79111 Freiburg / Germany                             *
**********************************************************