Mike Keitz wrote:
>
> On Sun, 4 Jan 1998 14:01:39 -0500 Aaron Hickman
> <hickmaab@DUNX1.OCS.DREXEL.EDU> writes:
> >Does anyone know what the requirements for infra red LEDs are when
> >using
> >a Sharp GPiU52X demodulator.
>


With regards to the Sharp detector. I had a problem with this device
falsely triggering this week. The project was on a vector board. Turns
out that a 22uF cap and 0.1 uF cap right at VCC of the module cleaned it
up.