Michael Ollendieck wrote:
>
> Hello,
>         I am just starting to use the PIC16C84 and so I just build a
> programmer
> using Microchip's AN589 specs.  I have MPLAB also.  The only thing
> stopping
> me is that I don't have software to download the hex code into the
> PIC.  I
> have seen that this executable file is available at
>         Andrew Errington's PIC Project Page:
> http://www.lancs.ac.uk/people/cpaame/pic/pic.htm
> but this site has been down recently.
>
>         Does anyone know of where I can get a executable file to do
> this?
>
> Thanks

You will find free code at:
http://www.dontronics.com/download.html
which is very close to the hardware of the an589.
This is based on the design by David Tait.
It was written by Nigel Goodwin and you will find both DOS and windows
versions for both the c84 and f84.
We hope to have an NT compatible version soon.

Don McKenzie  mailto:don@dontronics.com   http://www.dontronics.com

Don's Download Dungeon http://www.dontronics.com/download.html
DonTronics Logo Design Contest http://www.dontronics.com/logo.html
For more details, send a blank message to mailto:info@dontronics.com
or mailto:simstick@dontronics.com or mailto:basics@dontronics.com