I've seen some great responses to the original question, and appreciate it alot.
  I
wandered into Office Max and a crafts store and got tons of stuff to play with.
 I
found that it is not as easy as it sounds.  Sticky glue gets EVERYwhere.  I will
get back when I have done more work on this and have it working.

Thanks
Chris Eddy
Pioneer Microsystems, Inc.

Martin R. Green wrote:

> A search of the web turned up the fact that Dynamark has been
> discontinued.  There are at least two substitutes, a 3M product that
> images directly on the film with a laser printer, called DynaLaser,
> and a 3rd party product called Quick-Mark, that works like Dynamark
> with UV exposure, but requires no developer.  More info can be had at:
>
>     http://www.vpcinc.com/dynamark.htm
>
> CIAO - Martin.
>
> On Wed, 17 Dec 1997 11:42:55 EST, DREITEK <DREITEK@AOL.COM> wrote:
>
> >In a message dated 97-12-17 07:04:10 EST, you write:
> >
> ><<
> > The name of the company that supply polyester film to the place that I
> > have used for Mambrane keypads and front panel overlays is Autotex, they
> > are somewhere in the UK. I don't have any more info than that to hand, but
> > I think I've got more at home if needed.
> >
> > You must ensure that the film can take the higher temperatures that a
> > colour copier fuser unit uses ( I think its around 230 deg C, instead of
> > 180 deg C for B/W) thats why they do special OHP film for colour copiers.
> > It makes an expensive mess if you get it wrong!!!!
> >
> > Paul >>
> >Hello
> >3M makes a film called Dynamark that is a UV curable epoxy film.  You can
> >print your designs on thin paper and then use the paper as a contact
 positive.
> >Expose it to UV and develope it with and alcohol based developer.  It comes
 in
> >many colors and is available at larger Art outlets.
> >
> >Dave Duley
>
> Martin R. Green
> elimar@NOSPAMbigfoot.com
>
> To reply, remove the NOSPAM from the return address.
> Stamp out SPAM everywhere!!!