At 03:47 PM 12/18/97 EST5EDT, you wrote:
>>         One should be careful about the type of load presented to a
>> telephone line pair.  The equipment at the switch to which your phone is
>> connected may range in complexity from rotary steppers and mechanical relays
>
>So basically, your saying that there is no practical, recommended way
>to cut off ringing from one extension on the inside wiring?  I
>thought this might be the case, and I would have to set up the ring
>blocker on the enterence point to the house.  Any other suggestions?
>
>

Nah, even in the bad old days when Ma Bell made a marine drill sargent like
like a cub scout den mother, we used to disable a ringer by taking the case
off the phone, loosening the terminals and pulling a ringer wire off.  The
phone then "disappeared" from the scans. ;-)

Wynn