You can also buy film for overhead transparencies for your printer. You can
then use this as an overlay. I use the 3M spray adhesive to attach it after
cutting to size.


At 11:42 AM 12/17/97 EST, you wrote:
>In a message dated 97-12-17 07:04:10 EST, you write:
>
><<
> The name of the company that supply polyester film to the place that I
> have used for Mambrane keypads and front panel overlays is Autotex, they
> are somewhere in the UK. I don't have any more info than that to hand, but
> I think I've got more at home if needed.
>
> You must ensure that the film can take the higher temperatures that a
> colour copier fuser unit uses ( I think its around 230 deg C, instead of
> 180 deg C for B/W) thats why they do special OHP film for colour copiers.
> It makes an expensive mess if you get it wrong!!!!
>
> Paul >>
>Hello
>3M makes a film called Dynamark that is a UV curable epoxy film.  You can
>print your designs on thin paper and then use the paper as a contact
positive.
>Expose it to UV and develope it with and alcohol based developer.  It
comes in
>many colors and is available at larger Art outlets.
>
>Dave Duley
>
>
Larry G. Nelson Sr.
mailto:L.Nelson@ieee.org
http://www.ultranet.com/~nr