Hi Steve,

Have a look at the following URL for Radio Packet Controller Made with
PIC16C84.
    http://www.radiometrix.co.uk/




-----Original Message-----
From: Stephen H Alsop <steve@S.SSYSTEMS.EASYNET.CO.UK>
To: <PICLIST@MITVMA.MIT.EDU>
Date: 16 December 1997 20:04
Subject: Tx/Rx 418MHz, decoding using a PIC


>I have a project needing a data link (sending 10 bytes)
>for remote control.  I am using a 418MHz miniature
>Receiver and Transmitter.  The Rx o/p goes high
>on receipt of a carrier (o/p fed to a PIC) and so I will need to detect
>a start bit then a security number to ensure it is not noise then
>10 data bytes then a CRC byte to verify all was received intact.
>
>The Tx will be fed from a PIC to send the start+security byte +
>10 data bytes + CRC byte.
>
>Before I 're-invent the wheel'  has anyone done this before,
>and if so, is any standard code available?
>
>Thanks
>
>Stephen H Alsop    steve@s.ssystems.easynet.co.uk
>S&S Systems Ltd   http://easyweb.easynet.co.uk/~s.ssystems