Not sure if this got through last time I sent it...

Any suggestions for a cheap (<$2, 5Kpcs) lcd controller ? 
Display will be either direct drive (60 x 1) or 2:1 (30 x 2). Power
including display (small, 40 x 25mm) should be <15uA at 3.6v. A frame
rate output would be useful for waking up the PIC.
Looking at the data sheet, the 16C924 power consumption looks a bit
high (lcd on, sleep, WDT off). A 16C73, woken by the frame rate o/p
prescaled by timer 1 for a 1Hz wakeup may be a lower power solution if
I can match the component cost. I want to run for 8-10 years from an
AA lithium thionyl chloride battery (1AH) if possible!
 I like the Epson chips, as they are low power - not yet looked at
price for this display format - I've used them for bigger displays in
the past.. 
Any other suggestions welcome! 
     ____                                                           ____
   _/ L_/  Mike Harrison / White Wing Logic / wwl@netcomuk.co.uk  _/ L_/
 _/ W_/  Hardware & Software design / PCB Design / Consultancy  _/ W_/
/_W_/  Industrial / Computer Peripherals / Hazardous Area      /_W_/