To all network gurus on a PICLIST,
I have RS485 network of one master and multiple (around 5) remote
controls (with PICs, of coarse). In previous situations I always
daizy-chaned remotes, terminated two far ends and had no problems. Now I
can't do that. So I have star configuration with one master transmitter
connected to at least 5 parallel receivers (with cable length
300-500ft), and all 5 transmitters on remote controls connected to one
master receiver. Slave transmitters have transmit enable, so they are
activated only one at a time. Transceivers are MAX489.
So the question is:
Though I understand that star configuration is not recommended for 485,
what would be the best solution for this situation (from the point of
view of termination, I guess - or whatever).
Will be thankful for any advice.

Gennady Palitsky,
Jefferson Audio Video Systems
gennadyp@mainlink.net