Put it up, please.  I would find this useful too.  How about a save to file
of this dump that can then be imported into a spreadsheet and graphed in
real time.

Tim


At 04:26 27/11/97 -0500, you wrote:
>Do an Altavista search on LIRC.  (linux infra red controller or
>similar)  Info on how to hook the sharp/RS module up to the serial port
>and read it manually on the control signal bits.  I have a simple
>Quickbasic program that scrolls 1s and 0s up the screen so you can see
>what's hitting it in realtime..  If you'd like I can put it up on the
>net..
>
>
>> On Mon, 24 Nov 1997 06:15:51 -0800 Tom Handley <thandley@TELEPORT.COM>
>> writes:
>>
>> >   I'm using the standard Sharp/Radio Shack 40Khz IR front-end. It's
>> >one
>> >thing to look at the output on the scope and to implement a simple
>> >logic
>> >analyzer on a PIC or PC... I'd prefer to analyze the codes on the PC.
>> >I have a good idea how to do this but I know this has been done
>> >before.
>>
>
>


------------------------------------------------------------------
Personal Web Pages: http://web.ukonline.co.uk/members/tim.kerby/
Email: tim.kerby@ukonline.co.uk
------------------------------------------------------------------