Anybody figure out how to get HiTech C to write the .HEX file with the
embedded chip type information that Parallax & Tech-Tools products put out?
 I figure it could be done similarly to how the fuses are set (see the
__CONFIG macro in PIC.H) but I can't results.

Also, similar thing for the ID bytes.

A sample line would be:

:02FFFE004A07B0

This indicates a '74A (note that this generates the value 0x074A)

Similar codes are used for all the different chips.

Thanks!

Andy

==================================================================
Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
          Hardware & Software for Industry & R/C Hobbies
        "Go fast, turn right, and keep the wet side down!"
==================================================================