I kind of hoped not to have to go that route.  Would have been nice to have
a direct connection.  Oh well.

Rob


At 12:13 PM 10/8/97 +1000, you wrote:
>Rob Zitka wrote:
>
>> Hi,
>>
>> Does anyone know of a 25 pin D connector (serial type) that has pins
>> at a
>> right angle and whose pins are 0.100 pitch?  Wanted to do a project
>> that
>> uses it and put it onto some perf board with predrilled 0.100 holes.
>>
>> Thnaks,
>>
>> Rob
>
>The best thing to do here Rob is to use a set of male header pins (2 by
>13), an IDC Crimp connector, flat ribbon cable and a crimp DB-25 to
>suit. It's not all that difficult.
>
>You won't find a R/A DB-25 at .1" centers. .
>
>Don McKenzie  mailto:don@dontronics.com   http://www.dontronics.com
>
>Basic Stamp Windows 95 Front End Now Available.
>PicNPoke "Pacman like" Multimedia Simulator for the PIC16x84.
>SimmStick(tm) Atmel & PIC proto PCB's. 30 pin Simm Module Format.
>For more details, send a blank message to mailto:info@dontronics.com
>or mailto:simstick@dontronics.com or mailto:basics@dontronics.com
>
>