AND = Anode (+) of LED backlight
CATH = Cathode (-) of LED backlight

If you don't have LED backlighting then don't worry about these pins.

-Randie

> From vanes@ILINK.NIS.ZA Tue Sep 30 11:12:06 1997
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Date:         Tue, 30 Sep 1997 20:03:10 +0200
> From: Eric van Es <vanes@ILINK.NIS.ZA>
> Subject:      Re: MIZU's LCD display tech doc needed
> To: PICLIST@MITVMA.MIT.EDU
>
> N STEENKAMP [M.ING E&E] wrote:
>
> > Hi,
> > > P.S.  I use a truly LCD that has 16 pins, but only the first fourteen
> > > are used on the model without backlight.
> > >
> > Normally the baclight pins are quite seperate from the rest of the pins.
> > On the ones I have seen, the backlight pins are on the side of the
> > module while the connection pins are on the top or bottom.
> >
> > Regards,
> > Niki
>
> Look like that to me too Niki! I've got the same Powertip Display and there
> are two pads on the righthandside of the display for that.
>
> OTOH: Pin 15 is marked AND and pin16 CATH.
> So waht now?
>
> Perhaps the extra pads on the side of the display os for a custom LED?
> Unlikely though...
>
> --
> Eric van Es               | Cape Town, South Africa
> mailto:vanes@ilink.nis.za | http://www.nis.za/~vanes
> LOOKING FOR TEMPORARY / HOLIDAY ACCOMODATION?
> http://www.nis.za/~vanes/accom.htm
>