At 01.32 26/09/97 -0600, you wrote:
>Sorry folks, the quoted clock specs are micro seconds *NOT* ms as as
>stated. The write time numbers are correct. I forgot to look in the units
>colum after looking at the write time.
>
>Mark
>

Sorry for the possible errors of the source. I used some part of it for
program a 24C16 and the results was eccelent in few minutes, after a week
of big problem.
For me it's good for begin with I2C. The right way for program a memory
(i.e. timings, exact use, ecc.) is a good I2C ruotine and read the memory
data sheet.
Have a good time.


===================================================
Alboni Giorgio
Faenza (Ra) ITALY
E-Mail: rac1337@racine.ravenna.it

http://www.geocities.com/SiliconValley/Heights/5444
(Last Update: 19/06/97)
===================================================