At 18.35 21/09/97 -0400, you wrote:
>Hello All,
>             Could anyone please help me by mailing a simple I2C Read/Write
>routine to control a 24C01 serial EEPROM, as I have been struggling trying to
>modify AN578 for over a month. Below is the source code for my latest attempt
>which receives data at 1200 baud from the serial port of a p.c. The program
>is almost working; it appears to be writing and reading to the EEPROM since
>'gibberish' is printed on the LCD every time a character is sent from the
>p.c. I have done away with the interupt routine - is this okay ? is it
>possible to control the I2C features without using interupts in a similar
>manor to the USART features ?. Also do I still need to include the SSPADD
>address or is this only needed for multi-master operation ?.
>
>Many thanks: Lee Hewitt (Manchester ENGLAND)
>

Try the source in the attached, it's very good! I resolved my I2C problem
with it.
For some pic links try this page:

  www.geocities.com/SiliconValley/Way/5807

this is the best pic resurces list. There is Nicole Ambros home page links
too (the source of attached, i don't remember it).

Bye.



Attachment converted: wonderland:24lc65.html (TEXT/ttxt) (0000778E)


===================================================
Alboni Giorgio
Faenza (Ra) ITALY
E-Mail: rac1337@racine.ravenna.it

http://www.geocities.com/SiliconValley/Heights/5444
(Last Update: 19/06/97)
===================================================