At 11:42 PM 9/19/97 +0800, you wrote:
>Hi Anil,
>
>I found the same problem when I tried to let PIC16C73A work as
>SPI slave with MC68HC11, the PIC16C73A only support two
>modes of SPI. If you want to use all 4 modes of SPI, like what you
>have done on 68HC11, the PIC16C76 is good choice. It is pin-compatible
>with 73a, but the price much higher.

I was just quoted $9.05 for the '77 in PLCC in 100's.  That's reasonable
for what you get.  Hate to see the Digi-Key qty 1, though!

Andy

==================================================================
Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
          Hardware & Software for Industry & R/C Hobbies
        "Go fast, turn right, and keep the wet side down!"
==================================================================