Greetings and Salutations
The following code was generated to validate the  cross boundary
feasibility. The contents of OFFSET cycles from 0 to 9 BUT THE VALUE
6 AT H100 IS NEVER PICKED UP !!!!!!!
The sequence is thus : 1 2 3 4 5 7 8 9 0 !!!!!
PLEASE tell me what is wrong ????????

Kind Regards, Cassie Carstens
P.S. Cannot get to AN556 this morning. URL fail.
*******************************************************
0013 0815           00112      movf  OFFSET,0   ; ( or; movfw OFFSET)
0014 008E           00113      movwf W_TEMP
0015 30FA           00114      movlw LOW try
0016 070E           00115      addwf W_TEMP,w
0017 3000           00116      movlw HIGH try
0018 1803           00117      btfsc STATUS,C
0019 3E01           00118      addlw d'1'
001A 008A           00119      movwf PCLATH
001B 080E           00120      movf  W_TEMP,w
001C 20FA           00121      call  try
001D 008C           00122      movwf CallPar1
                                              etc...
*************************************
00FA                    00249      ORG H'0FA'
00FA                    00250 try
00FA 0782           00251      addwf PC,1
00FB 3401           00252      retlw d'1'
00FC 3402           00253      retlw d'2'
00FD 3403           00254      retlw d'3'
00FE 3404           00255      retlw d'4'
00FF 3405           00256      retlw d'5'
0100 3406           00257      retlw d'6'
0101 3407           00258      retlw d'7'
0102 3408           00259      retlw d'8'
0103 3409           00260      retlw d'9'
0104 3400           00261      retlw d'0'