At 11:50 12.09.1997 -0400, you wrote:
>Hello,
>
>I am using the latest MPLAB 3.22.02 that I obtained off the Microchip
>website. I am also using the Picstart Plus Development Programmer, Part
>#10-00157. When I try and configure the programmer port within MPLAB,
>I get an error message saying "Command [8D] not echoed properly [AB]."
>Thus, I'm not able to talk to the programmer.  What is happening here?
>I am running MPLAB on a Pentium Pro 200 with Windows NT 4.0 Workstation.

AFAIK MPLAB can not operate the Programmer if you are working under NT.
Thats an info from micrchip Germany. We asked because we figured out the
same problem.

Thomas
=8-)

**********************************************************
* Thomas Magin                  FON:   ++49-761-4543-489 *
* marquette-Hellige GmbH        FAX:                -507 *
* Emergency Systems             email: magin@hellige.de  *
* Munzinger Str. 3                                       *
* D-79111 Freiburg / Germany                             *
**********************************************************