On Thu, 11 Sep 1997, Mike Smith wrote:
>
> Somewhat difficult on the average PIC, these FFT's!

        Well, there's always the ever-popular look-up table. I also
thought of another one that is a little less processor intensive. It is
still a raw idea, but bear with me:

        The DTMF tones are on the scale of one kHz -- no problem for the
average PIC to sample accurately. You put a filter with its passband
straddling the DTMF range right in front of the ADC input. You then count
the period between maximum peaks (i.e., when the two tones are in phase)
to bring out the beat frequency, which should tell you which tone-pair is
on the line, because the tones were selected by bell labs so that their
beat frequencies are all different. You stick that into a lookup table and
read off the hex digit. As I said, it's off the cuff, but it ought to
work. OTH, a DTMF decoder chip is very cheap, and they generally have a
4-bit parallel interface.

        Pierce