Are'nt you then limiting the current capability of the reg?
                        Ian Douglas

On Fri, 29 Aug 1997, ERIC SCHLAEPFER wrote:

>      Hello,
>
>      I also have started working with PICs recently. After browsing around
>      the internet for a while, I decided to start with the PIC16C84. I
>      found a good, cheap programmer with only 8 components at
>      "http://www.isc-durant.com/nolan/article.htm".
>
>      The only confusing part of the programmer design is the input supply
>      voltage. I am currently using approx. 13.5 VDC from a "fooled" 7812
>      12VDC regulator. Just stick an LED's positive terminal to the
>      regulator's ground, and the negative terminal to the true ground and
>      you will get the higher voltage.
>
>      The page has just about everything else you need to program this
>      controller.
>
>      Good luck,
>
>      Eric Schlaepfer
>
>
> ______________________________ Reply Separator
 _________________________________
> Subject: Someone interested in getting into PICs.
> Author:  Herbert Graf <bn821@TORFREE.NET> at INTERNET
> Date:    8/28/97 9:46 PM
>
>
>     Frankly, I have had enough with dedicated chips and have decided to get
> into microcontrollers, after alot of reading I have decided the 16 series of
> PICs would be best for my purposes, hence adding myself to this group! :)
> Anyways, I want to get started as cheaply as possible, but also as quickly
> as possible. I
> am wondering what you all recommend for a programmer. Electronics Now
> magazine has one in it's Jan 94 issue that seems OK, except I need a
> programmed PIC to begin programming PICs, notice the paradox! I am going to
> go around tomorrow asking how much it would cost to get the PIC programmed
> so I will probably go that way, but I figured it would be better to ask here
> first for your opinions. What do you recommend? I want to build it myself,
> mainly for cost. I would love to find a programmer out there that doesn't
> need a programmed chip to use. I have found one that uses the PCs parrallel
> port, but it is kinda old and the parts would be really hard for me to find.
> Thank you all for any advice in this area. TTYAL
>