David Wong wrote:
>
> Does anyone have any source code for setting up a PIC16C63 or 65A as an I2C
> bus master-transmitter or master-receiver.  Or does anyone have any
> additional information on the SSPCON and SSPSTAT registers on the
> PIC16C63/5a.  The information given in the data book is not very helpful.

The data sheets on any of the I2C EEPROMs are very detailed. If you
want to use 7 bit  addressing, look for, say the 24C01. If you want
to use 10 bit addressing, look for the 24C65. I tried to use the
built-in I2C module once for master purposes, but found it easier to
use my own software routines.

Any Philips I2C component datasheet also contains the complete I2C
spec for that chip.

--
Friendly Regards

Tjaart van der Walt
mailto:tjaart@wasp.co.za
 ________________________________________________________
|        WASP International   http://wasp.co.za          |
|   R&D Engineer : GSM peripheral services development   |
|Vehicle tracking | Telemetry systems | GSM data transfer|
|Voice : +27-(0)11-622-8686  |  Fax : +27-(0)11-622-8973 |
|             WGS-84 : 26010.52'S 28006.19'E             |
|________________________________________________________|