At 07:51 PM 6/3/97 +0200, you wrote:
>Hi there
>
>I know this subject has been covered many times, but I would like to know
how to program the 64 bytes in the 16C84 with my programmer. I use MPASM
and the PicStart kit.
>I have had a look at the DE command, but you need to specify the address
you want to program and I can't find the start address for the first EEPROM
byte.
>I want to program a look-up table into this space.
>
>Chow for now
>
>Gavin Jackson

Keep in mind the picstart 16B cannot program the data eeprom unless you are
using my firmware replacement. If you have the picstart plus you have no
problem, you didn't say which you had.

Regards

Jim







>---------------------------
>vulcan@icon.co.za
>http://mail.icon.co.za
>---------------------------
>
>