At 11:16 AM 5/10/97 EDT, you wrote:
>        I've been using the CAD system from Advanced Microcomputer
>Systems in Florida for at least ten years.  I've done lots of designs
>with it and am quite satisfied.  It includes schematic capture through
>board layout.  They have a web site with demo software, but I don't
>recall the URL right now.  Try a search and you'll find them.
>


I have used this for about 5 years.  It was about $250. I think they have a
Windows version out.  Like all PCB programs it has its quirks (the parts
library system is bad IMHO).  I bought it when I was consulting. It was the
only program I found at the time that bridged the gap between low end
hobbiest and larger ($) systems. It is quite possible to do professional
quality layouts on it.

Despite the irritating library and rather poor customer service it was a
pretty good value for the cost.

- Gary

------------------------------------------------------------------------
Gary Sutcliffe,  W9XT          Unified Microsystems
ppvvpp@mixcom.com              PO Box 133 Slinger, WI 53086
http://www.qth.com/w9xt        414-644-9036