myke predko <PICLIST@MITVMA.MIT.EDU> wrote:

> [The "512-byte 16C84" issue] is a known problem with MPLAB 3.22.
> Change the part definition to a PIC16F84 and you should be fine.

    Keep in mind, however, that the polarity of the PWRTE
    configuration bit is different between the 'C84 and the 'F84...
    When you program a 16C84 with MPLAB configured for the 16F84,
    you'll need to set the PWRTE to the OPPOSITE value of the one
    you want.

    -Andy

=== Andrew Warren - fastfwd@ix.netcom.com
=== Fast Forward Engineering, Vista, California
=== http://www.geocities.com/SiliconValley/2499