At 09:45 AM 3/11/97 -0500, you wrote:
>> Did you measure the current through a 1K resistor between Vcc and Gnd
>after
>> the power was off ? How big are those filter caps anyway ?
>>
>
>47 uf & .1 uf, standard filter caps.
>
>> What happens if you replace the 10K with a 1K mentioned earlier ?
>>
>It clamps it faster, but it still doesn't cut it.  One of these outputs is
>still keeping VDC at .3!
>
>> What is the operating voltage on your filter caps when the system is ON ?
>>
>4.92 VDC


Shawn,

Now you know why Microchip added the brownout module to later chips.

Andy

==================================================================
Andy Kunz - Montana Design - 409 S 6th St - Phillipsburg, NJ 08865
          Hardware & Software for Industry & R/C Hobbies
        "Go fast, turn right, and keep the wet side down!"
==================================================================