Hello!

>       bcf porta,ra0
>       bsf status,RP0  ; Change bank 1
>       bsf trisa,0
>       bcf status,RP0  ; Change back to bank 0

Why do you change back to bank 0 after?

> >  Does it send the signal to the pin at the
> > same moment that I set in the TRISA register pin RA0 as
> > output?
>
>
>Yes, of course.

But what if I set the direction first with the TRIS register like Ed Tood
told me in his last message and then I set the output latch?

TTYL!
Jean
---------------
Jean-Francois & Alain Joly
jolyal@capitalnet.com