Hi folks,
        I am considering using a pic to control my Sony Camcoder Via the
LANC/Control-S interface with a PIC so I can set it up to do some
recording unatended for a security project.

        So far I have built a Tilt and turn system driven with a couple
of R/C servos driven with a 16c84 using PWM.

        My question is ....... does anybody out there have a good source
for LANC protocols/Commands Etc. on the net or can email me with them.

        BTW The pan and tilt system works with an old Sega control pad
to move the camera position and has two pre-settable positions which are
set and selected using the fire buttons if anybody is interested in the
source diagrams Etc. ask and you shall receive :)))))

        If I succeed in my efferts then I will post the project details
source Etc for general use.


Thanks In advance Peter
--
==================================
New Ideas come from those who
didn't know it wasn't possible
==================================